How to Remove an Unwanted Bathtub

Bathtub Removal SPA Moving Hot Tub Movers Service and Cost in Las Vegas |  MGM Junk Removal

Is your old bathtub not that functional already? Today may be the time for you to replace that. But before you install a new bathtub, you must remove first your existing tub. Written below are the basic steps that you need to follow in removing your unwanted bathtub.

 

Turn Off the Water ConnectionWhy should you turn off your mains water supply? - Brisbane Wholesale  Hardware

Before you start working, you must make sure to turn off your bathroom’s water connection. In some homes, they have a shutoff valve that can turn off only the bathroom’s water connection. For some that does not have this, they will have to turn off the water connection of their entire house. While your water is turned off, you open the water valve at a low level so that the pressure that remains in the line will be removed.

 

Remove the Tub Drains and Stoppers

How to Unclog a Bathtub Using the Trip Lever | how-tos | DIY

Remove the water and drain sources that connects the tub to the exterior plumbing before you move the tub. First, you have to remove the drain covers together with its outward hardware. You must properly remove all hardware and water sprouts completely. In disconnecting the drain, you must gain access to the connection of the tub line as well as the drain line under it. You can easily access this from below or behind the drain. You can use a channel-lock pliers set in disconnecting the overflow valve and the drain from the drainpipe.

 

Getting the Tub Loose

How to Remove and Replace a Bathtub | Better Homes & Gardens

Before you can move the tub, you have to cut all the adhesives or the sealants of the tub from the floor or wall first using a utility knife. Using a prybar, check the edges of the tub for anything that keeps the tub in its place. If you discover any bolts, screws, or nails, you must remove all of it carefully. You can carefully pry all the tub’s edges until you can make sure that the entire tub has been unsecured wholly from the wall or floor.

 

Sliding the Tub Away from the Wall

How to Install a Whirlpool Bathtub | how-tos | DIY

Next, carefully pry up the tub’s front. You must be careful when doing this so that your floor will not be damaged. Ask for help from others and have one lift one edge of the tub while someone else slides a couple of 1”x4” wood planks between the floor and tub. Once you have lifted the tub from the floor, you can easily slide this away from the tub alcove by using the wood planks as skids.

 

Tub Removal and Cleanup

Once you have successfully pulled the tub away from the tub alcove, you can now remove this from your bathroom. It may or may not be necessary for you to break up your tub using a sledgehammer so that you can remove this easily. But this will depend on the material of your tub. After you remove the tub, you need to make sure that you clean up any debris or water in the area. Also, you may have to remove any support beams that aid in attaching the tub to your bathroom wall.

 

Does is seems to be a stressful job?

Bathtub removal is reasonably a simple job; however, this can be quite exhausting and messy. If you will choose to leave this job to professionals, you can hire Conway AR Demolition Contractor. We can assure you that you will not be disappointed with the service that you will receive from the company.

Do you know How to Remove the Sections of a Hardwood Flooring?